E-mail Subscription

Enter your email address:

Delivered by FeedBurner

Syndicate RSS

Mission Statement 

The purpose of FLAPS-2-APPROACH is two-fold:  To document the construction of a Boeing 737 flight simulator, and to act as a platform to share aviation-related articles pertaining to the Boeing 737; thereby, providing a source of inspiration and reference to like-minded individuals.

I am not a professional journalist.  Writing for a cross section of readers from differing cultures and languages with varying degrees of technical ability, can at times be challenging. I hope there are not too many spelling and grammatical mistakes.


Note:   I have NO affiliation with ANY manufacturer or reseller.  All reviews and content are 'frank and fearless' - I tell it as I see it.  Do not complain if you do not like what you read.

I use the words 'modules & panels' and 'CDU & FMC' interchangeably.  The definition of the acronym 'OEM' is Original Equipment Manufacturer (aka real aicraft part).


All funds are used to offset the cost of server and website hosting (Thank You...)

No advertising on this website - EVER!


Find more about Weather in Hobart, AU
Click for weather forecast






If you see any errors or omissions, please contact me to correct the information. 

Journal Archive (Newest First)

Entries in 240 Volts (1)


Never Do This - Changing Voltage Will Destroy Your Computer

I am using two computers networked.  I was doing some tests in an attempt to separate the sound between the two computers so I can utilize a headset when I heard a horrible grating noise coming from one of the computers.  I've heard the sound before so knew what it was; one of the fans was either failing or required lubricant in the bearing.  A little odd considering both computer are less than 3 months old.

Variable Fan Switch

The computer has a variable fan switch on the rear toward the power cord.  I lent down behind the MIP to either turn the switch to low or off in the hope of isolating the fan noise.  As I selected the switch I heard "BLIP" and the computer stopped.  I closed the other computer down, found a torch (flashlight) and peered behind the computer console.  I saw the switch, but to my horror I also saw another switch.  Sliding the computer out from behind the MIP I authenticated what I had thought.  Instead of switching the variable fan switch I has tripped the switch that changes the computer from 240 volt to 110 volt.  Both switches reside almost side by side.


Never change a voltage switch on the rear of the a computer from your countries voltage requirement.  Depending upon which direction you move the switch and what voltage you are current on, will indicate the resultant effect.  240 V - 110 V "blip"!  110 V to 240 V "BANG" with everything "fried" beyond repair.

In some respects I was lucky, I only "fried" my power source.  A replacement was relatively easy  and I had a IT friend check the computer to ensure there were no other issues.  Oh - and the noisy fan was isolated and replaced.  It was the fan on one of the video cards (there are three video cards.  The video card was replaced under warranty.

Advice For The Future

Use a piece of tape to cover the switch so it cannot be inadvertently tripped.