E-mail Subscription

Enter your email address:

Delivered by FeedBurner

Syndicate RSS

Mission Statement 

The purpose of FLAPS-2-APPROACH is two-fold:  To document the construction of a Boeing 737 flight simulator, and to act as a platform to share aviation-related articles pertaining to the Boeing 737; thereby, providing a source of inspiration and reference to like-minded individuals.

I am not a professional journalist.  Writing for a cross section of readers from differing cultures and languages with varying degrees of technical ability, can at times be challenging. I hope there are not too many spelling and grammatical mistakes.


Note:   I have NO affiliation with ANY manufacturer or reseller.  All reviews and content are 'frank and fearless' - I tell it as I see it.  Do not complain if you do not like what you read.

I use the words 'modules & panels' and 'CDU & FMC' interchangeably.  The definition of the acronym 'OEM' is Original Equipment Manufacturer (aka real aicraft part).


All funds are used to offset the cost of server and website hosting (Thank You...)

No advertising on this website - EVER!


Find more about Weather in Hobart, AU
Click for weather forecast






If you see any errors or omissions, please contact me to correct the information. 

Journal Archive (Newest First)

Entries in Gauges (1)


OEM Brackets to Secure Gauges and Modules to Boeing 737 MIP

Original Equipment Manufacturer (OEM) parts usually attach to the infrastructure of the flight deck by the use of DZUS fasteners.  The easy to use fasteners allow quick and easy removal of panels and modules.  But what about the gauges that are used in the Main Instrument Panel (MIP); for example, the yaw dampener, brake pressure and AFDS module.

LEFT:  Take your pick – brackets for different sized modules and gauges.  The brackets when tightened provide a snug and secure fit for any OEM gauge or module.

These items do not use DZUS fasteners for attachment to the MIP; rather they are inserted into the MIP from the front and secured from behind by a specially designed bracket.  The different sized brackets are made from lightweight aluminum and are designed to fit particular gauges and modules.   Each bracket incorporates, depending on the style, a number of screws.  These screws are used to loosen or tighten the bracket. 

The gauge is inserted into the MIP from the front.  The bracket is then placed over the gauge from behind the MIP and tightened by one or more of the resident screws.  The screws cause the bracket to clamp tightly to the shaft of the gauge and ‘sandwich’ the MIP between the flanges of the gauge and the edge of the bracket.  Once fitted, the Canon plug is then re-attached to the gauge.

LEFT:  Selection of gauges.  Note the flange on the forward part of the yaw dampener and brake pressure gauge (nearest glass) Click image to enlarge.

Of interest is that some brackets have been designed to fit the differing thicknesses between MIPs.  By turning the bracket end on end the appropriate thickness of the MIP is selected.  

As mentioned above, the brackets are designed to fit specifically sized and shaped gauges and modules; therefore, it is important to purchase the bracket that fits the gauge you are using.  There are several different sized brackets on the market that are used in the Boeing 737 classics and NG airframes.  The 'NG' for the most part incorporates identically sized gauges as the classics, so a bracket is not necessarily NG specific.

One of the benefits in using the OEM brackets is that they are designed for the purpose, are very easy to install, and facilitate the quick removal of a gauge or module should it be necessary.

In the next post we look more at flight training and discuss corsswind landings.